Remote Camera Control Application for Windows Ver. 1.5.0

    27-Nov-2023
    0200701505

    Download

    I have read and understood the disclaimer below
    and wish to download the designated software

    OS

    • Windows 11
    • Windows 10 (x64)

    Outline

    This software is used for remote operation of the camera while viewing the image.

    Detail

    Version 1.5.0 incorporates the following enhancements:
    - Adds preset thumbnail view.
    - Adds trace thumbnail view.
    - Adds function to display still image while moving to preset position.

    Installation Instructions
    Refer to the instructions for installing the Remote Camera Control application.

    <Application file>
    - RemoteCameraControlApplicationSetup.exe

    <Supported Models>
    CR-N700, CR-N500, CR-N300, CR-N100, CR-X300, EOS C500 Mark II, EOS C300 Mark III, EOS C70, XF605

    The application contains software modules developed by third parties. The details are available in the download: Readme-E.txt. The Third-party Software License (ThirdPartySoftware-E.pdf) and the license conditions are available in the OpenSource Folder which is inside the LICENSE folder.

    Update History

    Ver. 1.4.0
    - Adds the ability to move crop frame, resize crop frame, and select crop image destination (CR-N700 only).
    - Adds [Save Image Quality Settings] Button.
    - Adds the ability to change on/off of zoom-linked pan & tilt speed control per each camera.
    - Adds [Preset Speed Mode] for playback at the speed of preset registration.

    Ver. 1.3.0
    - The functions of this software have been extended to support XF605.
    - The focus guide can now be displayed at the clicked position.
    - Supports eye detection AF. When this function is turned on, the camera detects the eye of the main subject and automatically focuses on the subject, tracking the subject even if it moves.
    - Face detection AE is now supported. The camera detects the face of the main subject and adjusts the brightness automatically when the function is turned on.
    - It is now possible to start and stop video recording.
    - You can now select the output destination of the camera menu and operate the menu.
    - It is now possible to display shooting information such as camera shooting parameters, output resolution and frame rate, and custom pictures.
    - You can now assign any operation to any key on the joystick.
    - You can now select a custom picture stored in the camera.
    - The assign buttons (1-4) registered in the camera are now available.

    Ver. 1.2.0
    - Adds the ability to register and delete presets.
    - Adds the ability to click to focus on desired area.
    - Targets detected by the face detection and tracking functions are now highlighted with a square frame.
    - Adds the ability to select the tracking target when multiple faces are detected by the face detection and tracking functions.
    - Adds a [Details] tab to the camera’s operation area, and image quality settings such as [Sharpness] and [Black Gamma] can now be set.
    - Adds support for wiper control, enhanced ND filter control, and infrared shooting control.

    Ver. 1.1.0
    - Adds the ability to specify desired [Time] or [Speed Level] for Pan/Tilt/Zoom operations when selecting a preset.
    - Adds the ability to stop a preset operation by the [Stop] button.

    System requirements

    OS : Windows 11, Windows 10 64-bit
    CPU : Intel Core i7-8700 or greater
    Memory : 8 GB or more
    Display : Resolution 1920×1080 or greater

    Caution

    - Read the Readme file or the User Guide for this software before using. Important notes and restrictions regarding this software are contained therein.
    - Update the camera to the latest firmware.

    Setup instruction

    1. Download the file to any folder.
    2. Right-click the zip file, and then select Extract All to extract the file.

    File information

    1. File name : rccainstall-v150.zip
    2. File version : 1.5.0
    3. File type : zip
    4. File size : 100219KB

    Disclaimer

    All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.

    Canon Marketing (Malaysia) Sdn Bhd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.

    Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).

    You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.

    You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.

    By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.