PIXMA E3370

Download Brochure

Print

Print Head / Ink
Type	Permanent
Number of Nozzles	Total 1,280 nozzles
Ink Cartridges	PG-47, CL-57S (Optional: CL-57)
Maximum Printing Resolution	4800 (horizontal)^*1 x 1200 (vertical) dpi
*Print Speed^2(Approx.)** Based on ISO/IEC 24734 Click here for Summary Report Click here for Document Print and Copy Speed Measurement Conditions
Document (ESAT/Simplex)	7.7 / 4.0 ipm (mono/colour)
Photo (4x6") (PP-201/Borderless)	65 sec
Printable Width	Up to 203.2 mm (8")
Printable Area
Borderless Printing^*3	Top/Bottom/Right/Left margin: each 0 mm (Supported paper size: 4 x 6", 5 x 7", Square (5 x 5"))
Bordered Printing	Top margin: 3mm, Bottom margin: 5mm Left/Right margin: 3.4 mm (LTR: Left: 6.4 mm, Right: 6.3mm)
Support Media
Rear Tray	Plain Paper Photo Paper Plus Glossy II (PP-201, PP-208) (Supported paper size: 4 x 6", 5 x 7", Square (5 x 5"))
Paper Size
Rear Tray	A4, A5, B5, LTR, LGL, 4 x 6", 5 x 7", Square (5 x 5") Custom size: width 89 - 215.9 mm, length 127 - 676 mm *F4 is possible via custom size settings.
*Paper Size (Borderless)^4**	4 x 6", 5 x 7", Square (5 x 5")
Paper Handling (Maximum Number)
Rear Tray (Plain Paper)	A4 = 60
Paper Weight
Rear Tray	Plain Paper: 64-105 g/m², Canon specialty paper: Max 275 g/m² (Photo Paper Plus Glossy II, PP-201)
Ink End Sensor	Dot count
Print Head Alignment	Manual

Scan^*5

Scanner Type	Flatbed
Scanner Method	CIS (Contact Image Sensor)
*Optical Resolution^6**	600 x 1200 dpi
Scanning Bit Depth (Input/Output)
Grayscale	16 bit/8 bit
Colour	RGB each 16 bit/8 bit
*Line Scanning Speed^7**
Grayscale	1.5 ms/line (300 dpi)
Colour	3.5 ms/line (300 dpi)
Maximum Document Size
Flatbed	A4/LTR (216 x 297 mm)

Copy

Maximum Document Size	A4/LTR
Compatible Media
Size	A4/A5/B5/LTR/4 x 6"/5 x 7"/Square (5 x 5")
Type	Plain Paper Photo Paper Plus Glossy II (PP-201, PP-208)
Image Quality	2 positions (Draft, Standard)
*Copy Speed^8(Approx.)** Based on ISO/IEC 24734 Click here for Summary Report Click here for Document Print and Copy Speed Measurement Conditions
Document (sFCOT/Simplex)	3.0 ipm
Document (sESAT/Simplex)	2.7 sec
Multiple Copy
Mono/Colour:	1 - 20 pages

Network

Protocol	SNMP, HTTP, TCP/IP (IPv4/IPv6)
Wireless LAN
Network Type	IEEE 802.11b/g/n 2.4 GHz, Supported Channels: 1 - 13 (TW/HK: Supported Channels: 1 - 11 only)
Range	Indoor 50 m (depends on the transmission speed and conditions)
Security	WEP 64/128bit WPA-PSK (TKIP/AES) WPA2-PSK (TKIP/AES)
Direct Connection (Wireless LAN)	Available (Access Point Mode only)

Printing Solutions

AirPrint^®	Available
Windows 10 Mobile	Available
Mopria^® Print Service	Available
Canon Print Service (for Android)	Available
Cloud Service (from smartphone/tablet)	Available
Canon PRINT (for iOS/Android)	Available

System Requirements^*8

Windows 10 / 8.1 / 7 SP1
(operation can only be guaranteed on a PC with a pre-installed Windows 7 or later)

Mac OS X 10.11.6,
macOS 10.12 ~ 10.14

ChromeOS

General Specifications

Operation Panel
Display	LCD (1.5" / 3.8 cm segment mono)
Interface	USB 2.0
PictBridge (Wireless)	Available
*Operating Environment^9**
Temperature	5 - 35°C
Humidity	10 - 90% RH (no dew condensation)
*Recommended Environment^10**
Temperature	15 - 30°C
Humidity	10 - 80% RH (no dew condensation)
Storage Environment
Temperature	0 - 40°C
Humidity	5 - 95% RH (no dew condensation)
Quiet Mode	Available
Acoustic Noise (PC Print)
Plain Paper (A4, Mono)^*11	53.5 dB(A)
Power	AC 100 - 240 V, 50/60 Hz
Power Consumption (Approx.)
OFF	0.3 W
Standby (scanning lamp is off) USB connection to PC	1.7 W
Standby (all ports connected, scanning lamp is off)	1.7 W
Time to enter Standby mode	10 min 38 sec
Copying^*12 USB connection to PC	11 W
Environment
Regulation	RoHS (EU, China), WEEE (EU)
Dimensions (WxDxH) (Approx.)
Factory Configuration	435 x 316 x 145 mm
Output/ADF Trays Extended	435 x 553 x 212 mm
Weight (Approx.)	3.9 kg

Page Yield^*13

Plain Paper Click here for more information	*A4 Colour Documents^14:** Standard: PG-47: 400 CL-57S: 180 Optional: CL-57: 300
Photo Paper (PP-201) Click here for more information	*4 x 6" Photo^15:** Standard: PG-47: 3520^*16 CL-57S: 55 Optional: CL-57: 90

Ink droplets can be placed with a pitch of 1/4800 inch at minimum.
Document print speeds are the averages of ESAT (Word, Excel, PDF) in Office Category Test for the default simplex mode, ISO/IEC 24734.
Photo print speed is based on the default setting using ISO/JIS-SCID N2 on Photo Paper Plus Glossy II and does not take into account data processing time on host computer.
Print speed may vary depending on system configuration, interface, software, document complexity, print mode, page coverage, type of paper used etc.
Paper Type NOT supported for borderless printing are as follows: Envelope, High Resolution Paper, T-Shirt Transfer, Photo Stickers.
Paper types NOT supported for borderless printing are as follows: Envelope, High Resolution Paper, T-Shirt Transter.
TWAIN driver (ScanGear) is based on the TWAIN specification V1.9 and requires the Data Source Manager comes with the operating system.
Optical resolution scan is available, only when you use TWAIN Driver.
Optical resolution is a measure of maximum hardware sampling resolution, based on ISO 14473 standard.
The fastest speed in Hi-Speed USB on Windows PC. Transfer time to computer is not included.
Please visit https://asia.canon/support to check OS compatibility and to download the latest driver updates.
The performance of the printer may be reduced under certain temperature and humidity conditions.
For the temperature and humidity condition of papers such as photo paper, refer to the paper's packaging or the supplied instructions.
Acoustic Noise is measured based on ISO 7779 standard with default setting.
Copy: When copying ISO/JIS-SCID N2 (printed by inkjet printer) on A4 size plain paper using default settings.
Page yields may vary depending on content coverage, print settings, temperature, humidity, and frequency of printing.
Declared yield value is in accordance with ISO/IEC 24711, using the ISO/IEC 24712 colour chart. Values obtained by continuous printing.
Declared yield value is in accordance with ISO/IEC 29102, using the ISO/IEC 29103 chart. Values obtained by continuous printing.
Estimated supplemental yield.

Disclaimer

To maintain optimal printer performance, Canon printer automatically perform cleaning based on its condition. During this cleaning process, a small amount of ink is consumed, which may include all colours of ink.
[Cleaning Function]
The cleaning function helps remove air bubbles or clogs from the print head nozzles, preventing degradation in print quality or nozzle blockages.
Replacement parts for printers will be available for five years after production is discontinued. Depending on your model, we may recommend replacing it with a new unit or one that offers similar performance as part of our maintenance service. In such cases, you may find that supplies or accessories for your model are no longer available, or that compatible operating systems may change.
To achieve optimal print quality, use the ink within six months of opening.
Depending on your device, whether it is a computer or a smartphone and its operating system, the estimated ink level information displayed on your screen may differ from what appears on the printer's operation panel. Additionally, some parts of the estimated ink level message shown on the printer may not be visible or may appear at different times. Canon recommends using the information displayed on the printer's operation panel as your primary reference, noting that this information serves only as a guideline.
Depending on the type of paper and print settings, colour ink may still be used even when you print a monochrome document. If any colour of ink runs out, you will need to replace the ink cartridge.
You must install ink cartridges of all colours, regardless of whether you are printing in monochrome or colour. If any ink cartridges is not installed, an error will occur, and printing will not be possible.
When you use the Canon printer for the first time after installing the bundled ink cartridges, the printer consumes a small amount of ink to fill the nozzles of the print head. As a result, the number of sheets you can be printed with the initial set of ink cartridges is fewer than the subsequent cartridges.
The printing costs mentioned in the brochures or on the website are based on consumption data from the second and subsequent ink cartridges, not the first one.
For warranty details, please contact a Canon authorised sales representative in your country or region.
Please be aware that if a problem arises from using non-genuine ink cartridges (including those refilled with non-genuine ink through methods such as making a hole in the cartridge), a fee will be charged for repairs, even during the warranty period. Keep this in mind when using non-genuine ink.
Using non-genuine inks may affect the printer's performance and print quality. In rare cases, where there are no safety concerns, non-genuine inks can cause the print head to overheat and emit smoke due to the absence of certain ingredient found in genuine ink.
[Note: This does not apply to usage of all non-genuine inks.]

Prices, specifications, availability and terms of offers may change without notice.

Products / Services may be manufactured by and/or supplied to us by third party manufacturers / suppliers for distribution / resale (non-Canon brand products).

Prices above are recommended retail price in Malaysian Ringgit and may change without prior notice.