Consumer Business
Canon Online Store
ENG
Consumer
Switch to: Business
Warranty Support
ENG
Printing Inkjet Printers PIXMA E3470
More Info
RRP MYR 449.00
RRP MYR 449.00

PIXMA E3470

Print Head / Ink

Number of Nozzles

Total 1,280 nozzles

Ink Cartridges

PG-47, CL-57S (Optional: CL-57)

Maximum Printing Resolution

4800 (horizontal)*1 x 1200 (vertical) dpi

Print Speed*2 (Approx.)

Based on ISO/IEC 24734
Click here for summary report
Click here for Document Print and Copy Speed Measurement Conditions

Document (ESAT/Simplex)

7.7 / 4 ipm (mono/colour)

Photo (4 x 6") (PP-201/Borderless)

65 sec

Printable Width

Up to 203.2 mm (8")
Borderless: Up to 216 mm (8.5")

Printable Area

Borderless Printing*3

Top/Bottom/Left/Right margin: each 0 mm

Bordered Printing

Square (5 x 5"):
Top/Bottom/Left/Right margin: 6.0 mm

LTR/LGL:
Top margin: 3 mm, Bottom margin: 5 mm,
Left margin: 6.4 mm, Right margin: 6.3 mm

Others:
Top: 3 mm, Bottom: 5 mm, Left/Right: 3.4 mm

Support Media

Rear Tray

Plain Paper (64 - 105 g/m²)
Photo Paper Plus Glossy II (PP-201/PP-208)
Photo Stickers (PS-208/PS-808)

Paper Size

Rear Tray

A4, A5, B5, LTR, LGL, 4 x 6", 5 x 7", Square (5 x 5")

Custom size:
width: 89 - 215.9 mm, length: 127 - 676 mm
*F4 is possible via custom size settings.

Paper Size (Borderless)*4

4 x 6", 5 x 7", Square (5 x 5")

Paper Handling (Maximum Number)

Rear Tray

Plain Paper (A4, 64 g/m²) = 60
Plain Paper (Letter, 64 g/m²) = 60
Photo Paper Plus Glossy (PP-201, 4 x 6") = 20

Paper Weight

Rear Tray

Plain Paper: 64-105 g/m²
Canon paper:
max paper weight: approx. 275 g/m²
(Photo Paper Plus Glossy II, PP-201)

Ink End Sensor

Dot count type

Print Head Alignment

Manual

  1. Ink droplets can be placed with a pitch of 1/4800 inch at minimum.
  2. Document print speeds are the average of ESAT (Word, Excel, PDF) in Office Category Test for the default simplex mode, ISO/IEC 24734.
    Photo print speed is based on the default setting using ISO/JIS-SCID N2 on Photo Paper Plus Glossy II and does not take into account data processing time on host computer.
    Print speed may vary depending on system configuration, interface, software, document complexity, print mode, page coverage, type of paper used etc.
  3. Paper types NOT supported for borderless printing are as follows: Envelope, High Resolution Paper, T-Shirt Transfer, Photo Stickers.
  4. The following media does NOT support borderless printing: High Resolution Paper, T-Shirt Transfer, Photo Stickers.
  5. TWAIN driver (ScanGear) is based on the TWAIN specification V1.9 and requires the Data Source Manager comes with the operating system.
  6. Optical resolution scan is available only when you use TWAIN Driver. It is a measure of maximum hardware sampling resolution, based on ISO 14473 standard.
  7. The fastest speed in Hi-Speed USB on Windows PC. Transfer time to computer is not included.
  8. Copy speeds are the average of sFCOT and sESAT, ISO/IEC 29183.
    Copy speeds (ADF) are ESAT of copy in sequence, ISO/IEC24735.
    Copy speed may vary depending on document complexity, copy mode, page coverage, type of paper used etc. and does not take into account warm-up time.
  9. Please visit https://asia.canon/support to check OS compatibility and to download the latest driver updates.
  10. The performance of the printer may be reduced under certain temperature and humidity conditions.
  11. For the temperature and humidity conditions of papers such as photo paper, refer to the paper's packaging or the supplied instructions.
  12. Acoustic Noise is measured based on ISO7779 standard with default setting.
  13. When copying ISO/JIS-SCID N2 (printed by inkjet printer) on A4 size plain paper using default settings.
  14. Page yields may vary depending on content coverage, print settings, temperature, humidity, and frequency of printing.
  15. Declared yield value is in accordance with ISO/IEC 24711, using the ISO/IEC 24712 colour chart. Values obtained by continuous printing.
  16. Declared yield value is in accordance with ISO/IEC 29102, using the ISO/IEC 29103 chart. Values obtained by continuous printing.
  17. Estimated supplemental yield. 

Disclaimer
  • To maintain optimal printer performance, Canon printer automatically perform cleaning based on its condition. During this cleaning process, a small amount of ink is consumed, which may include all colours of ink.
    [Cleaning Function]
    The cleaning function helps remove air bubbles or clogs from the print head nozzles, preventing degradation in print quality or nozzle blockages.
  • Replacement parts for printers will be available for five years after production is discontinued. Depending on your model, we may recommend replacing it with a new unit or one that offers similar performance as part of our maintenance service. In such cases, you may find that supplies or accessories for your model are no longer available, or that compatible operating systems may change.
  • To achieve optimal print quality, use the ink within six months of opening.
  • Depending on your device, whether it is a computer or a smartphone and its operating system, the estimated ink level information displayed on your screen may differ from what appears on the printer's operation panel. Additionally, some parts of the estimated ink level message shown on the printer may not be visible or may appear at different times. Canon recommends using the information displayed on the printer's operation panel as your primary reference, noting that this information serves only as a guideline.
  • Depending on the type of paper and print settings, colour ink may still be used even when you print a monochrome document. If any colour of ink runs out, you will need to replace the ink cartridge.
  • You must install ink cartridges of all colours, regardless of whether you are printing in monochrome or colour. If any ink cartridges is not installed, an error will occur, and printing will not be possible.
  • When you use the Canon printer for the first time after installing the bundled ink cartridges, the printer consumes a small amount of ink to fill the nozzles of the print head. As a result, the number of sheets you can be printed with the initial set of ink cartridges is fewer than the subsequent cartridges.
  • The printing costs mentioned in the brochures or on the website are based on consumption data from the second and subsequent ink cartridges, not the first one.
  • You need to install ink cartridges of all colours whether you perform black and white printing or colour printing. If any of the ink cartridges is not installed, an error occurs and you cannot perform printing.
  • For warranty details, please contact a Canon authorised sales representative in your country or region.
  • Ink cartridges sold are generally meant for use with printers sold in the same region. The ink cartridges may bear unique labels or configurations and may not be compatible for use with printers sold in another region. To ensure optimal performance of your printer, please check with your local Canon office or authorised Canon reseller before relocating your printer from the location of purchase.
  • Please be aware that if a problem arises from using non-genuine ink cartridges (including those refilled with non-genuine ink through methods such as making a hole in the cartridge), a fee will be charged for repairs, even during the warranty period. Keep this in mind when using non-genuine ink.
  • Using non-genuine inks may affect the printer's performance and print quality. In rare cases, where there are no safety concerns, non-genuine inks can cause the print head to overheat and emit smoke due to the absence of certain ingredient found in genuine ink.
    [Note: This does not apply to usage of all non-genuine inks.]
Prices, specifications, availability and terms of offers may change without notice.
Products / Services may be manufactured by and/or supplied to us by third party manufacturers / suppliers for distribution / resale (non-Canon brand products).
Prices above are recommended retail price in Malaysian Ringgit and may change without prior notice.