14-Nov-2016
0400283902
I have read and understood the disclaimer below
and wish to download the designated software
Firmware Version 1.0.5 incorporates the following fix:
Corrects a phenomenon in which when using the camera with the EF-S 18-135mm f/3.5-5.6 IS USM or EF 70-300mm f/4-5.6 IS II USM lens, even if lens aberration correction is set to "Enable", correction will not be applied.
Firmware Version 1.0.5 is for cameras with firmware up to Version 1.0.4. If the camera's firmware is already Version 1.0.5, it is not necessary to update the firmware.
When updating the firmware of the camera, please review the instructions thoroughly before you download the firmware.
Q&A:
Preparations for a firmware update:
After the downloaded compressed file (.zip file) is extracted, a firmware folder is created.
*Extracting the downloaded file:
Right-click the zip file, and then select Extract All to extract the file.
The extracted folder contains the firmware (File name: CCF13105.FIR, File size: 17,400,944 bytes) and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish, and Simplified Chinese).
Before starting the firmware update operations, please confirm the contents of the download, and carefully read through the firmware update procedures.
(The following is the history of past firmware updates)
Q: Are the improvements from previous firmware versions included in Firmware Version 1.0.5?
A: Yes, the following improvements from the previous version are included:
(Previous) Version 1.0.4 improvements:
1. Fixes the following phenomena which may occur when the camera is used in combination with certain lens models equipped with a stepping motor.
Affected lenses: EF-S 18-135mm f/3.5-5.6 IS STM / EF-S 18-55mm f/3.5-5.6 IS STM
1. The camera may freeze in rare instances if you try to shoot with a lens cap attached or meter a subject in low contrast in Live View (or Movie) shooting.
2. Fine focus adjustment may not be possible in Remote Live View on the EOS Utility software.
2. Fixes a phenomenon in which some SD card products are not recognized by the camera.
3. Corrects some misspellings displayed on the menu screen.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Marketing (Malaysia) Sdn Bhd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.