RC-IP1000 PTZ Camera Controller
                            
                            
                        | LCD Display | 
                                                            Type: TFT colour LCD touch panel  Screen size: 7.0 in. (178 mm) Resolution: 800 x 480 (approximately 384,000 pixels)  | 
                                                    
| Supported Protocols | 
                                                            XC protocol (IP)  NU protocol (serial)  | 
                                                    
| No. of Connectible Cameras | 200 (IP), 5 (Serial) | 
| No. of Camera Groups | 20 (10 units per 1 group) | 
| SDI IN Terminal | 
                                                            BNC jack  12G / 6G / 3G / HD-SDI input  | 
                                                    
| SDI OUT Terminal | 
                                                            BNC jack  12G / 6G / 3G / HD-SDI output SDI IN terminal through output supported OSD can be superimposed on SDI input video Output of IP input video (LAN terminal) supported  | 
                                                    
| HDMI OUT Terminal | HDMI™ connector (Type A), output only, video only | 
| LAN Terminal | RJ45 x 5 (1000 BASE-T) | 
| Serial Interface | RJ45 x 5 | 
| Tally/GPIO | D-sub 25pin x 2 | 
| USB | USB Type A x 2 (for saving settings data, firmware update) | 
| Video Display on Touch Panel | YES (SDI IN/IP) | 
| Touch Focus from Screen | YES (SDI IN/IP) | 
| Preset | Up to 100 for each camera (depends on camera specs) | 
| Trace | Up to 10 for each camera (depends on camera specs) | 
| Menu Operation | Yes (touch panel or arrow button and SET/BACK buttons) | 
| No. of User Buttons | 5 (USER1 to USER10 can be controlled from the touch panel) | 
| Touch Focus from Panel | YES (SDI IN/IP) | 
| No. of Camera Selectable Buttons | 10 (usable as preset select) | 
| Operating/Storage Environment | 
                                                            Operating Temperature: 0°C - 40°C  (+32°F – +104°F)   Humidity: 20% – 90% (without condensation)  | 
                                                    
| Power Supply | 
                                                            LAN terminal  – LAN connector, PoE+ power supply supported (IEEE802.3at compliant), PoE cannot be used DC IN 12V terminal – DC input: DC 10.8 to 20 V, 2.5 A, 4-pin XLR connector  | 
                                                    
| Power Consumption | 
                                                            PoE+ input: 25.0 W (maximum power consumption)  Class 4 power sourcing equipment (requests 25.5 W) DC input: 27.0 W (maximum power consumption)  | 
                                                    
| Dimensions (W X H X D) | Approx. 342 x 145 x 245 mm (13.47 x 5.71 x 9.65 in.) (excluding protrusions) | 
| Weight | Approx. 3.4 kg (7.50 lb.) | 
| Initial Camera Settings without PC | YES | 
| Simultaneous Multi-Camera Setup | YES | 
| Stream Deck Connectivity | 
                                                            Selected models only  STREAM DECK XL STREAM DECK MK.2 STREAM DECK MINI STREAM DECK PEDAL  | 
                                                    
| Assist Function | Waveform monitor, vectorscope, and three types of markers (Area marker, center marker, grid marker) | 
| Camera Settings Copy Function | Yes | 
| Focus Guide Display | Yes (Manual Focus only) | 
| Camera Settings OSD | Yes (in IP only) | 
| Multi-display | 2x2 and 3x3 (On the touch panel and can be output) | 
| Thumbnail Display for Preset/Trace | Yes (On the touch panel and can be output) | 
Specifications and availability subject to change without notice. Weight and dimensions are approximate.