29-Jul-2025
0401076002
I have read and understood the disclaimer below
and wish to download the designated software
Firmware Version 1.2.0 incorporates the following fixes and enhancements:
1. Adds support for the Canon Multi-Camera Control wireless remote application.
2. Adds support for NDI 6.
*NDI: An open standard for connecting video equipment over a network.
3. Enables camera control using Standard Communication (IP) when using the USB Camera Functions.
4. Adds a 2-second [I Frame Interval (sec.)] for IP streaming video.
5. Adds an automatic reconnection feature for RTMP streaming when disconnected.
6. Adds an automatic reconnection feature for SRT streaming when the camera starts up and disconnects.
7. Adds SRT streaming start / stop buttons to the Click Operation Menu.
8. Enables switching the video reception frame rate on the settings page to Normal, Low, or Off.
9. Adds a button to reset WB / Color settings and Image Quality Details settings to their default values.
10. Enables turning off the POWER / STATUS Lamp.
11. Adds area selection zoom function.
12. Adds the ability to set the movement speed by Time as a preset.
13. Adds [Preset] as the restore target in the [Backup / Restore] function.
14. Adds XC command for smoother angle movement with slow deceleration.
15. Adds the ability to set PT [Movement Range] while watching the video.
16. Increases the size of the thumbnail image on mouseover.
17. Enables setting the maximum magnification of digital zoom.
18. Improves security features.
- Adds the ability to review the history of any changes made to the password, network information, or other settings.
19. Enables firmware updates to be performed when the camera is connected to the internet and if new firmware is made available on Canon servers.
Update the firmware from the camera's Settings Page.
For details, refer to the camera's Settings Guide.
<Firmware file>
- crn100-v120.bin
The firmware contains software modules developed by third parties. For details, see "ReadMe-E.txt" in the downloaded file and "ThirdPartySoftware-E.pdf" (third-party software) in the lower part of each folder in the "LICENSE" folder. The license terms for each module are contained in the same folder.
Ver. 1.1.1
1. Fixed an issue where externally registered presets were not always saved.
2. Fixed an issue in which the subject was out of focus when the focus position was specified via standard communication from software manufactured by another company. If the focus position specified via standard communication is registered in software from another manufacturer, re-register it after updating the firmware.
Ver. 1.1.0
1. Adds Lite version of the automatic tracking application. Lite version application has basic features of the automatic tracking application.
2. Enables the ability to adjust Custom Picture [Black: Master Pedestal], [Black: Master Black Red], and [Black: Master Black Blue] more widely.
3. Revises the display of Clear Scan Settings.
4. Adds function for turning [S/N Priority] ON or OFF when [Noise Reduction] is set to [Auto]. When ON, noise reduction is prioritized.
5. Adds function for setting a limit on the range of operation of the pan/ tilt.
6. Enables the ability to set zoom and focus speeds in more detail.
7. Enables the ability to make [Speed Level] of Preset setting a finer adjustment at lower speeds.
8. Adds function for color bar output.
9. Adds function for selecting SDI output timecode superposition on or off.
10. Increases the maximum frame rate for USB output.
11. Enables YUV format USB output.
12. Displays the Camera Name set by the user at the top of the settings page.
13. Increases target bit rate limit when using encryption with SRT protocol.
14. Adds function for registering the still thumbnail when a preset memory is registered.
15. Adds function for registering the still thumbnail of the trace start position.
16. Adds function for freeze image during preset moving.
17. Adds Adaptive Bitrate (ABR) function for video delivery over SRT protocol.
18. Adds the option "other than network settings and management information" as restore items for the backup/ restore function. When selected this option, network settings and management information are not saved.
19. Adds Backup/ Restore function for Add-On Applications System settings.
20. Fixes minor issues.
Ver. 1.0.1
1. Fixes an issue that caused audio noise during RTMP distribution to the video streaming service.
2. Fixes minor issues.
Windows 11, Windows 10 64bit
macOS 15, macOS 14
Do not turn off the power to the camera while performing the firmware update.
Turning off the camera at this stage may result in disabling its ability to boot correctly.
1. Download the file to any folder.
2. Extract files from a compressed file (ZIP file).
3. For further instructions, refer to Readme in the decompressed folder.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Marketing (Malaysia) Sdn Bhd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.
