Scanning to computer via USB connection
Solution
Follow this procedure to scan a document to your computer. Make sure that the scanner driver is installed. To check if the driver is installed, see Installing the Software using USB connection.
Place the first page on the platen glass if you are not using the ADF.
For documents you can scan, see Document Requirements.
Press [SCAN].
The SCAN indicator lights up and the machine enters scan standby mode.
Start MF Toolbox, then select the scan format.
The mark will be displayed above the button you select.
Press [Start].
NOTE
If you want to cancel scanning, Press [Stop/Reset] on the operation panel, then click [OK] on the computer screen.